Product Technical Spec.
Body Material:
Aluminum or steel, corrosion resisting
Body Style:
Standard round a
Pilot Diameter:
0.5000 inches
Overall Length:
1.7210 inches
Flange Diameter:
0.7500 inches
Flange Thickness:
0.0620 inches
Undercut Diameter:
0.6870 inches
Undercut Width:
0.0620 inches
Shaft Diameter:
0.1247 inches single shaft
Shaft Length:
0.4810 inches single shaft
Fragility Factor:
Moderately rugged
Maximum Tempurature Rise:
10.0 degrees celsius
Stator Input Voltage Rating In Volts:
11.8
Stator Input Current Rating:
23.0 milliamperes
Stator Input Electrical Power Rating:
44.0 milliwatts
Frequency In Hertz:
400.0
Zso Impedance Magnitude In Ohms:
Between 444.00 and 570.00
Zso Impedance Angle In Deg:
Between 76.00 and 81.00
Zrs Impedance Magnitude In Ohms:
Between 830.00 and 940.00
Zrs Impedance Angle In Deg:
Between 16.00 and 20.00
Phase Shift Angle In Deg:
8.000 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
25.00 input
Maximum Total Null Voltage Output In Millivolts Per Volt:
30.00
Electrical Error Angular Range In Minutes:
-7.0/+7.0
Spline Tooth Quantity:
13 single shaft
Actuator Friction Torque At Plus 25 Deg Celsius:
0.04 inch-ounces
Shaft Maximum Radial Play:
0.0004 inches
Shaft End Play:
0.0007 inches
Pilot Length:
0.0400 inches
Mounting Surface To Terminal End Distance:
1.2400 inches
Spline Tooth Diametral Pitch:
120 single shaft
Shaft Thread Series Designator:
Unf single shaft
Shaft Thread Direction:
Right-hand single shaft
Shaft Thread Length:
0.1900 inches single shaft
Shaft Type:
Spline w/threads single shaft
Transformation Ratio:
2.203 rotor to stator
Shaft Thread Size:
0.120 inches single shaft
Terminal Type And Quantity:
5 wire lead
Item Name:
Synchro,control Transformer
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
